Science Fair Project Encyclopedia
In physics, Classical mechanics is one of the two major sub-fields of study in the science of mechanics, which is concerned with the motions of bodies, and the forces that cause them. The other sub-field is quantum mechanics. Roughly speaking, classical mechanics was developed in the 400 years since the groundbreaking works of Brahe, Kepler, and Galilei, while quantum mechanics developed within the last 100 years, starting with similarly decisive discoveries by Planck, Einstein, and Bohr.
The notion of “classical“ may be somewhat confusing, insofar as this term usually refers to the era of classical antiquity in European history. While many discoveries within the mathematics of that period remain in full force today, and of the greatest use, the same cannot be said about its "science". This in no way belittles the many important developments, especially within technology, which took place in antiquity and during the Middle Ages in Europe and elsewhere.
However, the emergence of classical mechanics was a decisive stage in the development of science, in the modern sense of the term. What characterizes it, above all, is its insistence on mathematics (rather than speculation), and its reliance on experiment (rather than observation). With classical mechanics it was established how to formulate quantitative predictions in theory, and how to test them by carefully designed measurement. The emerging globally cooperative endeavor increasingly provided for much closer scrutiny and testing, both of theory and experiment. This was, and remains, a key factor in establishing certain knowledge, and in bringing it to the service of society. History shows how closely the health and wealth of a society depends on nurturing this investigative and critical approach.
The initial stage in the development of classical mechanics is often referred to as Newtonian mechanics, and is characterized by the mathematical methods invented by Newton himself, in parallel with Leibniz, and others. This is further described in the following sections. More abstract, and general methods include Lagrangean mechanics and Hamiltonian mechanics.
Classical mechanics produces very accurate results within the domain of everyday experience. It is enhanced by special relativity for objects moving with large velocity, near the speed of light. Classical mechanics is used to describe the motion of human-sized objects, from projectiles to parts of machinery, as well as astronomical objects, such as spacecraft, planets, stars, and galaxies, and even microscopic objects such as large molecules. Besides this, many specialties exist, dealing with gases, liquids, and solids, and so on. It is one of the largest subjects in science and technology.
Although classical mechanics is largely compatible with other "classical" theories such as classical electrodynamics and thermodynamics, some difficulties were discovered in the late 19th century that can only be resolved by more modern physics. When combined with classical thermodynamics, classical mechanics leads to the Gibbs paradox in which entropy is not a well-defined quantity and to the ultraviolet catastrophe in which a black body is predicted to emit infinite amounts of energy. The effort at resolving these problems led to the development of quantum mechanics.
Description of the theory
The following introduces the basic concepts of classical mechanics. For simplicity, it uses a point particle, which is an object with negligible size. The motion of a point particle is characterized by a small number of parameters: its position, mass, and the forces applied to it. Each of these parameters is discussed in turn.
In reality, the kind of objects which classical mechanics can describe always have a non-zero size. True point particles, such as the electron, are normally better described by quantum mechanics. Objects with non-zero size have more complicated behavior than hypothetical point particles, because of the additional degrees of freedom - for example, a baseball can spin while it is moving. However, the results for point particles can be used to study such objects by treating them as composite objects, made up of a large number of interacting point particles. The center of mass of a composite object behaves like a point particle.
Position and its derivatives
The position of a point particle is defined with respect to an arbitrary fixed point in space, which is sometimes called the origin, O. It is defined as the vector r from O to the particle. In general, the point particle need not be stationary, so r is a function of t, the time elapsed since an arbitrary initial time. In pre-Einstein relativity (known as Galilean relativity), time is considered an absolute in all reference frames.
In classical mechanics, velocities are directly additive and subtractive. For example, if one car traveling East at 60 km/h passes another car traveling East at 50 km/h, from the perspective of the car it passes it is traveling East at 60−50 = 10 km/h. From the perspective of the faster car, the slower car is moving 10 km/h to the West. What if the car is traveling north? Velocities are directly additive as vector quantities; they must be dealt with using vector analysis.
Mathematically, if the velocity of the first object in the previous discussion is denoted by the vector v = vd and the velocity of the second object by the vector u = ue where v is the speed of the first object, u is the speed of the second object, and d and e are unit vectors in the directions of motion of each particle respectively, then the velocity of the first object as seen by the second object is:
- v' = v - u
- u' = u - v
When both objects are moving in the same direction, this equation can be simplified to:
- v' = ( v - u ) d
Or, by ignoring direction, the difference can be given in terms of speed only:
- v' = v - u
The acceleration vector can be changed by changing its magnitude, changing its direction, or both. If the magnitude of v decreases, this is sometimes referred to as deceleration or retardation; but generally any change in the velocity, including deceleration, is simply referred to as acceleration.
Frames of reference
The following consequences can be derived about the perspective of an event in two reference frames, S and S', where S' is traveling at a relative speed of u to S.
- v'' = v - u (the velocity of a particle from the perspective of S is slower by u than from the perspective of S)
- a' = a (the acceleration of a particle remains the same regardless of reference frame)
- F' = F (since F = ma) (the force on a particle remains the same regardless of reference frame; see Newton's law)
- the speed of light is not a constant
- the form of Maxwell's equations is not preserved across reference frames
Forces; Newton's second law
Newton's second law relates the mass and velocity of a particle to a vector quantity known as the force. If m is the mass of a particle and F is the vector sum of all applied forces (i.e. the net applied force), Newton's second law states that
The quantity mv is called the momentum. Typically, the mass m is constant in time, and Newton's law can be written in the simplified form
where a is the acceleration, as defined above. It is not always the case that m is independent of t. For example, the mass of a rocket decreases as its propellant is ejected. Under such circumstances, the above equation is incorrect and the full form of Newton's second law must be used.
Newton's second law is insufficient to describe the motion of a particle. In addition, it requires a value for F, obtained by considering the particular physical entities with which the particle is interacting. For example, a typical resistive force may be modelled as a function of the velocity of the particle, for example:
with λ a positive constant. Once independent relations for each force acting on a particle are available, they can be substituted into Newton's second law to obtain an ordinary differential equation, which is called the equation of motion. Continuing the example, assume that friction is the only force acting on the particle. Then the equation of motion is
This can be integrated to obtain
where v0 is the initial velocity. This means that the velocity of this particle decays exponentially to zero as time progresses. This expression can be further integrated to obtain the position r of the particle as a function of time.
Important forces include the gravitational force and the Lorentz force for electromagnetism. In addition, Newton's third law can sometimes be used to deduce the forces acting on a particle: if it is known that particle A exerts a force F on another particle B, it follows that B must exert an equal and opposite reaction force, -F, on A.
If a force F is applied to a particle that achieves a displacement Δs, the work done by the force is the scalar quantity
If the mass of the particle is constant, and ΔWtotal is the total work done on the particle, obtained by summing the work done by each applied force, from Newton's second law:
where Ek is called the kinetic energy. For a point particle, it is defined as
For extended objects composed of many particles, the kinetic energy of the composite body is the sum of the kinetic energies of the particles.
If all the forces acting on a particle are conservative, and Ep is the total potential energy, obtained by summing the potential energies corresponding to each force
This result is known as conservation of energy and states that the total energy,
is constant in time. It is often useful, because many commonly encountered forces are conservative.
Beyond Newton's Laws
Classical mechanics also includes descriptions of the complex motions of extended non-pointlike objects. The concepts of angular momentum rely on the same calculus used to describe one-dimensional motion.
There are two important alternative formulations of classical mechanics: Lagrangian mechanics and Hamiltonian mechanics. They are equivalent to Newtonian mechanics, but are often more useful for solving problems. These, and other modern formulations, usually bypass the concept of "force", instead referring to other physical quantities, such as energy, for describing mechanical systems.
Consider two reference frames S and S' . For observers in each of the reference frames an event has space-time coordinates of (x,y,z,t) in frame S and (x' ,y' ,z' ,t' ) in frame S' . Assuming time is measured the same in all reference frames, and if we require x = x' when t = 0, then the relation between the space-time coordinates of the same event observed from the reference frames S' and S, which are moving at a relative velocity of u in the x direction is:
- x' = x - ut
- y' = y
- z' = z
- t' = t
This set of formulas defines a group transformation known as the Galilean transformation (informally, the Galilean transform). This type of transformation is a limiting case of Special Relativity when the velocity u is very small compared to c, the speed of light.
One of the first scientists who suggested abstract laws was Galileo Galilei who may have performed the famous experiment of dropping two cannon balls from the tower of Pisa. (The theory and the practice showed that they both hit the ground at the same time.) Though the reality of this experiment is disputed, he did carry out quantitative experiments by rolling balls on an inclined plane; his correct theory of accelerated motion was apparently derived from the results of the experiments.
Sir Isaac Newton was the first to propose the three laws of motion (the law of inertia, his second law mentioned above, and the law of action and reaction), and to prove that these laws govern both everyday objects and celestial objects.
Newton also developed the calculus which is necessary to perform the mathematical calculations involved in classical mechanics. However it was Gottfried Leibniz who developed the notation of the derivative and integral which are used to this day.
After Newton the field became more mathematical and more abstract.
- Edmund Halley - List of equations in classical mechanics
- important publications in classical mechanics
- Feynman, Richard Phillips, Six Easy Pieces. ISBN 0201408252
- Feynman, Richard Phillips, and Roger Penrose, Six Not So Easy Pieces. March 1998. ISBN 0201328410
- Feynman, Richard Phillips, Lectures on Physics. ISBN 0738200921
- Kleppner, D. and Kolenkow, R. J., An Introduction to Mechanics, McGraw-Hill (1973). ISBN 0070350485
- Gerald Jay Sussman and Jack Wisdom, Structure and Interpretation of Classical Mechanics (SICM), MIT Press (2001). ISBN 0-262-019455-4
- Herbert Goldstein , Charles P. Poole, John L. Safko, Classical Mechanics (3rd Edition), Addison Wesley; ISBN: 0201657023
- Rosu, Haret C., "Classical Mechanics". Physics Education. 1999. [arxiv.org : physics/9909035]
- Horbatsch, Marko, "Classical Mechanics Course Notes".
- Sussman, Gerald Jay & Wisdom, Jack (2001). Structure and Interpretation of Classical Mechanics
- Hoiland, Paul (2004). Preferred Frames of Reference & Relativity
The contents of this article is licensed from www.wikipedia.org under the GNU Free Documentation License. Click here to see the transparent copy and copyright details