Science Fair Projects Ideas - Diver Propulsion Vehicle

All Science Fair Projects

      

Science Fair Project Encyclopedia for Schools!

  Search    Browse    Forum  Coach    Links    Editor    Help    Tell-a-Friend    Encyclopedia    Dictionary     

Science Fair Project Encyclopedia

For information on any area of science that interests you,
enter a keyword (eg. scientific method, molecule, cloud, carbohydrate etc.).
Or else, you can start by choosing any of the categories below.

Diver Propulsion Vehicle

(Redirected from Diver propulsion vehicle)

A Diver Propulsion Vehicle or a DPV is an item of diving equipment used by scuba divers to increase their range while underwater where their endurance is restricted due to limited availability of breathing gas and need to avoid decompression sickness.

A DPV generally consists of a battery-powered electric motor which drives a propeller. The machine should be is designed to avoid some predictable operating problems. It should be neutrally buoyant in the water. The diver should not be able to accidentally start the motor. The propeller should be shielded so that it does not damage the diver, the diver's equipment or marine life.

DPVs are useful for long journeys at constant depth where navigation is easy. Some divers engaged in cave diving and technical diving use DPVs. The machine helps move the bulky equipment the divers carry. It also allows them to make better use of their short underwater time because they have greater decompression requirements due to deep diving.

For many recreational divers DPVs are not useful. Buoyancy control is vital for diver safety: the DPV has the potential to make buoyancy control difficult and cause barotrauma if the diver ascends or descents under power. Navigation in visibility of less than 5 metres using a DPV could be difficult. Also, many forms of smaller marine life are very well camouflaged or hide well and are only seen by divers who move very slowly and are very vigilant.

There are these sorts of DPV:-

Contents

Manta-boards

This is merely an unpowered piece of board (usually rectangular) with two long ropes attached. It is towed by a surface boat. A diver holds onto it and keeps it submerged by holding it at the correct angle like an upside-down aerofoil.

Diver-tugs, tow-behind, scooters

The most common sort of DPV is where a diver is towed behind it holding onto one of its two handles on its stern and/or tow leash. The diver could wear an harness and backplate or BC with a front crotch-strap D-ring where the scooter is clipped by means of special safety spring-clip and tow leash with proper length. These types of scooters are efficent because the divers rides in the slip stream of the scooter body as opposed to a "ride-on- top" which must be ridden and increases drag, which effects scooter battery burn time.

Manned torpedoes and similar

These are roughly torpedo-shaped or fish-shaped vehicles that one or more divers (often two) ride. Sometimes they sit astride it. Sometimes it has hollows in its top and the divers sit inside them. One well-known type is the manned torpedo or "chariot" which commando frogmen used in the 1939-1945 war. Similar vehicles have been made for work divers or sport divers; as these do not have a warhead, their bow tends to be pointed for better streamlining. One example is the Dolphin which was made on the Isle of Wight (UK) in the 1970s.

Subskimmers

These are sort of RIB (inflatable boat). It is equipped to inflate and deflate itself. When submerged it seals its motor and runs with battery-electric thrusters. Thus it transforms between a fast light surface boat and a submerged diver-rider. There are these makes:-
- Subskimmer. This project was started in the 1970s by Submarine Products Ltd. of Hexham in Northumberland in England and passed through various hands. It is now being made by Alphachamp. Its thrusters are on a rotatable cross-arm. There are pictures and more information at that link. The name "Subskimmer" is correctly a tradename owned by Alphachamp.
- Infernus. This project is being made by the Swedish group KTH. Infernus is smaller than Subskimmer. Their website is unfortunately only in Swedish. They use the word "subskimmer" as a generic.

Miscellaneous

There are DPV's where the diver holds on in some other way. One example is the Protei-5 Russian diver-rider where the diver is clamped on top of it.

Wet-subs

As DPV's get bigger, they gradually merge into submarines. A wet-sub can be classed as a small submarine where the pilot's seat is naturally flooded and he must wear diving gear. Covert military operations use (SDV) swimmer delivery vehicles to deliver and retrieve operators into harbors and near-shore undetected.

External Links

Diver Propulsion Vehicle manufacturers

10-26-2009 08:16:03
The contents of this article is licensed from www.wikipedia.org under the GNU Free Documentation License. Click here to see the transparent copy and copyright details
Science kits, science lessons, science toys, maths toys, hobby kits, science games and books - these are some of many products that can help give your kid an edge in their science fair projects, and develop a tremendous interest in the study of science. When shopping for a science kit or other supplies, make sure that you carefully review the features and quality of the products. Compare prices by going to several online stores. Read product reviews online or refer to magazines.

Start by looking for your science kit review or science toy review. Compare prices but remember, Price $ is not everything. Quality does matter.
Science Fair Coach
What do science fair judges look out for?
ScienceHound
Science Fair Projects for students of all ages
All Science Fair Projects.com Site
All Science Fair Projects Homepage
Search | Browse | Links | From-our-Editor | Books | Help | Contact | Privacy | Disclaimer | Copyright Notice