Science Fair Projects Ideas - Plücker coordinates

All Science Fair Projects

      

Science Fair Project Encyclopedia for Schools!

  Search    Browse    Forum  Coach    Links    Editor    Help    Tell-a-Friend    Encyclopedia    Dictionary     

Science Fair Project Encyclopedia

For information on any area of science that interests you,
enter a keyword (eg. scientific method, molecule, cloud, carbohydrate etc.).
Or else, you can start by choosing any of the categories below.

Plücker coordinates

(Redirected from Line geometry)


In mathematics Plücker co-ordinates are a way to assign to each line in projective 3-space a point in projective 5-space. Plücker co-ordinates were introduced by Julius Plücker in 1844.

Writing each point in homogeneous co-ordinates the Plücker Mapping is defined as follows:

\begin{matrix} \phi : \mathbb{P}^3 \times \mathbb{P}^3 &\rightarrow& \mathbb{P}^5 \\ (x_0:x_1:x_2:x_3) \times (y_0:y_1:y_2:y_3) &\mapsto& (p_{01}:p_{02}:p_{03}:p_{12}:p_{13}:p_{23}) \end{matrix}

where pij = xiyj - xjyi

This can be expressed in a more compact form. Consider the matrix:

\begin{pmatrix} x_0 & x_1 & x_2 & x_3 \\ y_0 & y_1 & y_2 & y_3 \end{pmatrix}

Then pij is just seen to be the determinant of the 2x2 matrix consisting of the ith and jth columns.

Contents

1 Line geometry

Properties of the Plücker Mapping

For the following arguments, X = (x_0:x_1:x_2:x_3) \in \mathbb{P}^3, Y = (y_0:y_1:y_2:y_3) \in \mathbb{P}^3 and \phi(X,Y) = (p_{01}:p_{02}:p_{03}:p_{12}:p_{13}:p_{23}) \in \mathbb{P}^5 as defined above.

The Plücker Mapping is well defined

This is only true for X \ne Y.

First, we notice that not all the pij are zero ( (0:0:0:0:0) is not a point of \mathbb{P}^5 ). This is true because if y_{k_1} is a nonzero component of y, then there exists k2 with k_2 \ne k_1 with x_{k_2} \ne \frac{x_{k_1}}{y_{k_1}}y_{k_2} (otherwise X = \frac{x_{k_1}}{y_{k_1}}Y = Y \in \mathbb{P}^3).

Then the component of φ(X,Y), p_{k_1k_2} = x_{k_1}y_{k_2} - x_{k_2}y_{k_1} = y_{k_1}( \frac{x_{k_1}}{y_{k_1}}y_{k_2} - x_{k_2} ) \ne 0.

Next, if X = X^\prime and Y = Y^\prime \in \mathbb{P}^3 then X^\prime =\lambda X and Y^\prime = \mu Y.

So \phi(X^\prime,Y^\prime) = (p_{01}^\prime:p_{02}^\prime:p_{03}^\prime:p_{12}^\prime:p_{13}^\prime:p_{23}^\prime)

where p_{ij}^\prime = x_i^\prime y_j^\prime - x_j^\prime y_i^\prime = \lambda x_i \mu y_j - \lambda x_j \mu y_i = \lambda \mu( x_i y_j - x_j y_i ) = \lambda \mu p_{ij} so

\phi(X^\prime,Y^\prime) = \lambda \mu (p_{01}:p_{02}:p_{03}:p_{12}:p_{13}:p_{23}) = (p_{01}:p_{02}:p_{03}:p_{12}:p_{13}:p_{23}) = \phi( X, Y ) \in \mathbb{P}^5.

So φ is well defined if X \ne Y \in \mathbb{P}^3.

The Plücker Mapping takes Lines to Points

If X^\prime and Y^\prime are on the line determined by X and Y in \mathbb{P}^3 then

X^\prime = ( x_0 + ry_0: x_1 + ry_1: x_2 + ry_2: x_3 + ry_3 ) and

Y^\prime = ( x_0 + sy_0: x_1 + sy_1: x_2 + sy_2: x_3 + sy_3 ) for some r,s with r \ne s.

Then the ijth component of \phi( X^\prime, Y^\prime ) is (xi + ryi)(xj + ryj) - (xj + ryj)(xi + syi). Expanding, this product, we have

(xi + ryi)(xj + ryj) - (xj + ryj)(xi + syi) = (s - r)(xiyj - yjxi) = (s - r)pij

So \phi( X^\prime, Y^\prime ) = (s-r) \phi( X,Y ) = \phi( X,Y ) \in \mathbb{P}^5

So φ takes points on the same line in \mathbb{P}^3 to the same point in \mathbb{P}^5.

For the other direction, we wish to show that if \phi( X,Y ) = \phi( X^\prime, Y^\prime ) = ( p_{01}:p_{02}:p_{03}:p_{12}:p_{13}:p_{23} ) then (X,Y) and (X^\prime,Y^\prime) determine the same line in \mathbb{P}^3.

This follows easily from a simple observation:

\begin{matrix} y_0X - x_0Y & = & ( 0: x_1y_0 - x_0y_1: x_2y_0 - x_0y_2 : x_3y_0 - y_3x_0 ) = ( 0: -p_{01} : -p_{02} : -p_{03} ) \\ y_0^\prime X^\prime - x_0^\prime Y^\prime & = & ( 0: x_1^\prime y_0^\prime x_0^\prime y_1^\prime : x_2^\prime y_0^\prime - x_0^\prime y_2^\prime : x_3^\prime y_0^\prime - x_0^\prime y_3^\prime ) = ( 0: -p_{01} : -p_{02} : -p_{03} ) \\ \end{matrix}

Similar calculations yield that y_iX -x_iY = y_i^\prime X^\prime - y_i^\prime Y^\prime

But yiX - xiY is on the line defined by X,Y and y_i^\prime X^\prime - x_i^\prime Y^\prime are on the line defined by X^\prime,Y^\prime. Since the lines have more than two points in common, they must be the same.

So we can think of φ(X,Y) as the line (in \mathbb{P}^3) through X and Y.

The Image of the Plücker Map

The image of the Plücker map in \mathbb{P}^5 is called the Plücker quadric.

Define C \subset \mathbb{P}^5 by C:{(p01:p02:p03:p12:p13:p23) | p01p23 - p02p13 + p03p12 = 0}

A direct calculation yields that the image of a line (p01:p02:p03:p12:p23) satisfies the equation p01p23 - p02p13 + p03p12 = 0

So the image of φ is contained in C.

For a point (p01:p02:p03:p12:p13:p23) in C, one of the components must be nonzero. So we suppose p_{01} \ne 0 otherwise we can change coordinates.

Now let X = (0:p01:p02:p03) and Y = (p01:0: - p12: - p13)

Then \phi( X,Y ) = (-p_{01}^2:-p_{01}p_{02}:-p_{01}p_{03}:-p_{01}p_{12}:-p_{01}p_{13}:-p_{02}p_{13}+p_{12}p_{03} ) using our relation p01p23 - p02p13 + p03p12 = 0 we have - p02p13 + p12p03 = - p01p23 so \phi( X, Y ) = (-p_{01}^2:-p_{01}p_{02}:-p_{01}p_{03}:-p_{01}p_{12}:-p_{01}p_{13}:-p_{01}p_{23} ) = (p_{01}:p_{02}:p_{03}:p_{12}:p_{13}:p_{23})

So the Plücker map maps onto C.

Uses of the Plücker Map

Using the Plücker Map we can think of certain points in \mathbb{P}^5 as lines in \mathbb{P}^3. We can use this characterization to easily find certain classes of lines.

  • If we want all the lines through the point (x_0:x_1:x_2:x_3) \in \mathbb{P}^3, a direct calculation yields that these are just the lines with Plucker co-ordinates (p01:p02:p03:p12:p13:23) where x0x2p13 - x0x1p23 - x1x3p02 = 0
  • If we want all the lines in the plane x0 = a1x1 + a2x2 + a3x3, another calculation shows that these are just the points with Plucker co-ordinates satisfying a1p01 + a2p02 + a3p03 = 0

Line geometry

During the nineteenth century, line geometry was studied quite intensively. In terms of the formulation given above, this is a description of the intrinsic five-dimensional geometry on the quadric.

Other formulations of Plücker co-ordinates

Plucker co-ordinates can be formulated more generally using the ideas of multilinear algebra and the wedge product. This leads to a simple formulation of the generalisation of the Plücker mapping.

A Plücker map is a map π

\begin{matrix} \pi : Gr(n,N) &\rightarrow& \mathbb{P}(\wedge^n\mathbb{C}^N)\\ span( v_1, \ldots, v_n ) &\mapsto& \mathbb{C}( v_1 \wedge \ldots \wedge v_n )\\ \end{matrix}

where Gr(n,N) is the Grassmannian, i.e. the space of all n-dimensional subspaces of an N-dimensional vector space. The map described above is the particular case where n = 1, N = 3.

In the general context, the Grassmannian can be completely characterised as an intersection of quadrics, each coming from a relation on the Plücker co-ordinates that derives from linear algebra.

10-26-2009 08:16:03
The contents of this article is licensed from www.wikipedia.org under the GNU Free Documentation License. Click here to see the transparent copy and copyright details
Science kits, science lessons, science toys, maths toys, hobby kits, science games and books - these are some of many products that can help give your kid an edge in their science fair projects, and develop a tremendous interest in the study of science. When shopping for a science kit or other supplies, make sure that you carefully review the features and quality of the products. Compare prices by going to several online stores. Read product reviews online or refer to magazines.

Start by looking for your science kit review or science toy review. Compare prices but remember, Price $ is not everything. Quality does matter.
Science Fair Coach
What do science fair judges look out for?
ScienceHound
Science Fair Projects for students of all ages
All Science Fair Projects.com Site
All Science Fair Projects Homepage
Search | Browse | Links | From-our-Editor | Books | Help | Contact | Privacy | Disclaimer | Copyright Notice