Diagram of a Mortise and Tenon Joint

Simple and strong, the mortise and tenon joint (also called the mortice and tenon) has been used for centuries by woodworkers around the world to join two pieces of wood, most often at an angle close to 90°. Although there are many variations on the theme, the basic idea is that end of one of the members is inserted into a hole cut in the other member. The end of the first member is called the tenon, and it is usually narrowed with respect to the rest of the piece. The hole in the second member is called the mortise. The joint may be glued, pinned, or wedged to lock it in place.

A mortise is a cavity cut into a timber to receive a tenon.

There are several kinds of mortises:

• Open mortise - a mortise which has only three sides.
• Stub mortise - a shallow mortise, typically no deeper than 7 cm.
• Through mortise - a mortise which passes entirely through a piece.
• Wedged half-dovetail - a mortise where the back is deeper, or longer, than the front, or opening. The space for the wedge initially allows room for the tenon to be inserted, the presence of the wedge, after the tennon has been engaged, prevents its withdrawal.
• Through wedged half-dovetail - a wedged half-dovetail mortise which passes entirely through the piece.

A tenon is a projection on the end of a timber for insertion into a mortise. Usually the tenon is taller than it is wide.

There are several kinds of tenons:

• Stub tenon - a short tenon, often no more than 5 cm long.
• Tusk tenon
• Through tenon - a tenon which passes entirely through the piece of wood it is inserted into, being clearly visible on the back side.
• Teasel tenon - a term used for the tenon on top of a jowled or gunstock post, which is typically received by the mortise in the underside of a tie beam . A common element of the English tying joint.
• Top tenon - the tenon which occurs on top of a post.

Source

• This article is partly based on a Metaweb article at [1] under the terms of the GNU Free Documentation License.

Mortise tenon.svg