Science Fair Project Encyclopedia
At times of low electrical demand, excess electrical capacity is used to pump water into the higher reservoir. When there is higher demand, water is released back into the lower reservoir through a turbine, generating hydroelectricity. Reversible turbine/generator assemblies act as pump and turbine (usually a francis turbine design). Between 70% and 85% of the electrical energy used to pump the water into the elevated reservoir can be regained in this process. Some facilities use abandoned mines as the lower reservoir, but many use the height difference between two natural bodies of water or artificial reservoirs.
This system is economical as it flattens out the variations in the load on the power grid, permitting thermal power stations such as coal-fired plants and nuclear power plants that provide base-load electricity to continue operating at their most efficient capacity, while reducing the need to build special power plants which run only at peak demand times using more costly generation methods.
As well as energy management, pumped storage systems are important components in controlling electrical network frequency and in provision of reserve generation. Thermal plants are much less able to respond to sudden changes in electrical demand, which cause frequency and voltage instability. Pumped storage plants, in common with other hydroelectric plants, can respond to these changes within seconds.
The first use of pumped storage was in the 1890s in Italy and Switzerland. In the 1930s reversible hydroelectric turbines became available. These turbines could operate as both turbine-generators and in reverse as electric motor driven pumps. The latest in large-scale engineering technology are variable speed machines for greater efficiency. These machines generate in synchronisation with the network frequency, but operate asynchronously (independent of the network frequency) as motor-pumps.
A new concept is wind-pumped water storage where vagaries in wind power can be leveled by using the wind power to fill a reservoir and generating grid power from the reservoir turbines.
In 2000 the United States had 19500 MWe capacity of pumped storage. This produced a net -5500 MWe of power because they consume more power filling their reservoirs than they generate by emptying them. Still the technique is considered a worthwhile addition to the electrical grid as the most cost effective means to date for storage of mass amounts of electrical power.
In 1999 the EU had 32 GW capacity of pumped storage out of a total of 188 GW of hydropower and representing 5.5% of total electrical capacity in the EU.
Worldwide list of pumped storage plants
- Bendeela , 80 MW
- Jindabyne Pumping Station
- Kangaroo Valley, 160 MW
- Tumut Three , (1973), 1,500 MW
- Wivenhoe Power Station , 500 MW
- Turlough Hill 292 MW
- Piastra Edolo (1982), 1,020 MW
- Chiotas (1981), 1,184 MW
- Presenzano (1992), 1,000 MW
- Lago Delio (1971), 1,040 MW
- Grand Maison (1997), 1,070 MW
- La Coche , 285 MW
- Le Cheylas , 485 MW
- Mortézic , 920 MW
- Revin , 800 MW
- Super Bissorte , 720 MW
- Imaichi (1991), 1,050 MW
- Kannagawa (2005), 2,700 MW is under construction. When completed in 2005, it will be the world's largest pumped storage plant.
- Kazunogawa (2001), 1,600 MW
- Kisenyama , 466 MW
- Matanoagawa (1999), 1,200 MW
- Midono , 122 MW
- Niikappu , 200 MW
- Okawachi (1995), 1,280 MW
- Okutataragi (1998), 1,932 MW
- Okuyoshino , 1,206 MW
- Shin-Takasegawa , 1,280 MW
- Shiobara , 900 MW
- Takami , 200 MW
- Tamahara (1986), 1,200 MW
- Yagisawa , 240 MW
- Yanbaru (1999), 30 MW is the first seawater pumped hydro plant.
- Żarnowiec, 716 MW
- Porąbka-Żar , 500 MW
- Solina , 200 MW
- Żydowo , 150 MW
- Niedzica , 92.6 MW
- Dychów , 79.5 MW
- Blenheim-Gilboa , NY (1973), 1,200 MW
- Castaic, CA (1978), 1,566 M
- Clarence Cannon , MO (1983), 58 MW
- Helms , CA (1984),
- Lewiston (Niagra) , NY (1961), 2,880 MW
- Ludington, MI (1973), 1,872 MW
- Mount Elbert, 200 MW, 1,212 MW
- Mt. Hope , 2,000 MW
- Raccoon Mountain , TN (1979), 1,530 MW
- Summit Pumped Water Plant , 1500 MW
- Taum Sauk, MO, 450 MW
- Bath County, VA, 420 MW
- Siah Bisheh, Iran, (1996), 1,140 MW
- Rance River, St. Malo, France 240 MW hybrid pumped water-tidal plant
- Drakensberg Pumped Storage Scheme , South Africa, (1983) 1,000 MW.
- Juktan, Sweden
Salt water (ocean)
- Underground power station
- Water turbine
- Francis turbine
- Kaplan turbine
- Grid energy storage
The contents of this article is licensed from www.wikipedia.org under the GNU Free Documentation License. Click here to see the transparent copy and copyright details