Science Fair Project Encyclopedia
S3 Texture Compression
S3 Texture Compression (S3TC) (sometimes also called DXTn or DXTC) is a group of related image compression algorithms originally developed by S3 Graphics, Ltd. for use in their Savage3D computer graphics accelerator. Unlike previous image compression algorithms, S3TC's fast random access to individual pixels made it uniquely suited for use in compressing textures in hardware accelerated 3D computer graphics. Its subsequent inclusion in Microsoft's DirectX 6.0 led to widespread adoption of the technology among hardware and software makers. While S3 Graphics is no longer a leading competitor in the graphics accelerator market, the company continues to receive revenues from patent licenses related to S3TC technology.
There are five variations of the S3TC algorithm (named DXT1 through DXT5, referring to the FOURCC code assigned by Microsoft to each format), each designed for specific types of image data. All convert a 4x4 block of pixels to a 64-bit or 128-bit quantity, resulting in compression ratios of 8:1 or 4:1 with 32-bit RGBA input data. S3TC is a lossy compression algorithm, resulting in image quality degradation, but for most purposes the resulting images are more than adequate. (The notable exception is the compression of normal map data, which usually results in annoyingly visible artifacts. ATI's 3Dc compression algorithm is a modification of DXT5 designed to overcome S3TC's shortcomings in this area.)
Like many modern image compression algorithms, S3TC only specifies the method used to decompress images, allowing implementers to design the compression algorithm to suit their specific needs. The early compression routines were not optimal, and although since greatly improved, hindered early adoption of S3TC by developers. The nVidia GeForce 1 through to GeForce 4 cards also used 16 bit interpolation to render DXT1 textures, which resulted in banding when unpacking textures with color gradients. Again, this created an unfavorable impression of texture compression, not related to the fundamentals of the codec itself.
DXT1 is the smallest variation of S3TC, storing 16 input pixels in 64 bits of output, consisting of two 16-bit RGB 5:6:5 color values and a 4x4 two bit lookup table.
If the first color value (c0) is numericly greater than the second color value (c1), then two other colors are calculated, such that and .
Otherwise, if , then and c3 is transparent.
The lookup table is then consulted to determine the color value for each pixel, with a value of 0 corresponding to c0 and a value of 3 corresponding to c3. DXT1 does not support texture alpha data.
DXT2 and DXT3
DXT2 and DXT3 converts 16 input pixels into 128 bits of output, consisting of 64 bits of alpha channel data (four bits for each pixel) followed by 64 bits of color data, encoded the same way as DXT1 (with the exception that the 4 color version of the DXT1 algorithm is always used instead of deciding which version to use based on the relative values of c0 and c1). In DXT2, the color data is interpreted as being premultiplied by alpha, in DXT3 it is interpreted as not having been premultiplied by alpha. Typically DXT2/3 are well suited to images with sharp alpha transitions, between translucent and opaque areas.
DXT4 and DXT5
DXT4 and DXT5 converts 16 input pixels into 128 bits of ouput, consisting of 64 bits of alpha channel data (two 8 bit alpha values and a 4x4 3 bit lookup table) followed by 64 bits of color data (encoded the same way as DXT2 and DXT3).
If α0 > α1, then six other alpha values are calculated, such that , , , , , and .
Otherwise, if , four other alpha values are calculated such that , , , and with α6 = 0 and α7 = 255.
The lookup table is then consulted to determine the alpha value for each pixel, with a value of 0 corresponding to α0 and a value of 7 corresponding to α7. DXT4's color data is premultiplied by alpha, whereas DXT5's is not. Because DXT4/5 use an interpolated alpha scheme, they generally produce superior results for alpha (transparency) gradients than DXT2/3. Some consider DXT5 to be the most flexible general purpose compression codec.
|FOURCC||Description||Alpha premultiplied?||Compression ratio||Texture type|
|DXT1||Opaque/1-bit alpha||N/A||8:1 / 6:1||Simple non alpha|
|DXT2||Explicit alpha||Yes||4:1||Sharp alpha|
|DXT3||Explicit alpha||No||4:1||Sharp alpha|
|DXT4||Interpolated alpha||Yes||4:1||Gradient alpha|
|DXT5||Interpolated alpha||No||4:1||Gradient alpha|
- NVIDIA Texture Tools
- ATI Developer: Tools
- MSDN Compressed Texture Resources
- Comparison between S3TC and FXT1 texture compression
- The Truth about S3TC Note: This article used an early S3TC compression engine, not nVidia's or ATI's updated codecs.
The contents of this article is licensed from www.wikipedia.org under the GNU Free Documentation License. Click here to see the transparent copy and copyright details