Search for Science Fair Projects

1000 Science Fair Projects with Complete Instructions

Attribution: This is a cached copy of a third party project. Many of these sites are from 20 years ago and the majority are no longer running. We show only the first page of the project. We do not save all pages since copyright belongs to the third-party author.
Soils as electrical systems
colored balls

Soils As Electrical Systems

what's new What's New?
blank gif
features Features
blank gif
links Links
blank gif
resources Resources
blank gif
globe-related GLOBE-Related
blank gif
soil science basics Soil Science Basics
blank gif
soil & society Soil & Society
blank gif
Soil and the env. Soil & the Environment
blank gif
working with soil Working with soil
blank gif
soil & students Soil & Students
blank gif
soil & agriculture Soil & Agriculture
blank gif
Index Index
blank
Home Home

This learning activity was designed by Dr. Larry P. Wilding of Texas A&M University

    Materials Needed:

    1. 60 grams (1/4 cup) of clayey soil
    2. One 500 mL (pint) glass or plastic beaker or jar
    3. One 6 volt dry-charge lantern battery with two screw top terminals at the top of the battery (e.g. Everready Classic Lantern Battery)
    4. Two pieces of 12 gauge, plastic insulated, multiple strand, twisted copper wire about 50 cm (20 inches) in length

     

     

    Procedures:

    1. Place 60 grams of the clayey soil in the 500 mL glass or plastic jar.
    2. Add 500 mL of tap water to the above container with soil
    3. Stir or shake the container for several minutes until the soil is completely mixed with the water.
    4. Let the suspended soil materials in the container settle for 10 minutes.
    5. On each end of the electric wires, remove the insulation and strip back to expose the bare wire for about 5 cm (2 inches) at the end of the wires.
    6. Connect one end of each wire to the terminals of the battery and screw the terminal cap tight to fix the wire to the terminal.
    7. Place each of the other ends of the electrical wires in the clay suspension about 5 cm (2 inches) below the top of the water line in the beaker holding the clay slurry. Make sure the bare ends of the two wires are spaced about 5 cm (2 inches apart) and do not touch each other. Mark or note which of the two wires is connected to the anode (positive end of the battery) and which is connected to the cathode (negative end of the battery).
    8. Leave the wire electrodes in the clay slurry for about 10 to 15 minutes and then pull them out to see what happened.

     

     

    Observations and Interpretations:

    1. Before the wire electrodes are removed from the clay slurry, predict what you will find when the electrodes are removed. Which electrode do you think will have attracted the clay to accumulate about the bare wire? Why?

    2. What general principle is being observed here? Anions (e.g. clay minerals) go to the anode (positive electrode) and cations (e.g. most plant nutrients-Ca, Mg, Na, K, etc. ) go to the cathode (negatively charged electrode). Hence, most plant nutrients (cations) in soils bond to clay surfaces.

    3. If, instead of a clay suspension, suppose that the Methylene Blue dye solution had been used. In that case which electrode would you have predicted that the dye would have been plated out on--cathode or anode?

    4. The demonstration here is the same principle used in electrolysis for resilvering a mirror. Silver chloride is used as the plating material. The mirror is placed in a solution of silver chloride. Cations of silver and anions of chloride form the silver chloride solution. An electric current is introduced into the solution such that the mirror is made the cathode. Hence, silver cations plate out on the mirror by the process of electrolysis.

    5. This demonstration also confirms the electrical principle that LIKES REPEL AND UNLIKES ATTRACT.

    6. This demonstration confirms the fact that SOILS ARE ELECTRICAL CHEMICAL SYSTEMS that provide remarkable potential to attract and hold plant nutrients. The more positive charges associated with the nutrient the tighter the adsorption to the soil. Also, the greater the clay and organic colloid content of the soil the greater the storage bank to hold nutrients available to plants.

    7. The demonstration also supports the remarkable chemical buffering and filtering qualities of soils for cationic pollutants. Most soils also possess some anionic buffering potential but this is less effective than the cationic sorptive capacity.

    This is why the potential for nitrate pollution from water transport through soil systems is much greater than pollution from metal cations moving through soil systems. However, pollutants absorbed to soil colloidal surfaces can be major concerns to water quality when soil sediments are eroded into fresh water stream and aquifer bodies.

 

Back to Soil Science Education Home Page


Webmaster: Izolda Trakhtenberg, izolda@ltpmail.gsfc.nasa.gov
Information Contact: Izolda Trakhtenberg, izolda@ltpmail.gsfc.nasa.gov
Responsible Civil Servant: Dr. Elissa Levine, globe@ltpmail.gsfc.nasa.gov

Last Updated:September 25, 2001